FGLair™ app SET UP - STEP4: Pairing USB: RC type 2 - Manual connection
1
Tap [＋] to add a new air conditioner.
2
Select the adapter type of your air conditioner.
3
Select a [Remote Controller Type2].
4
Read the note and tap [Next].
5
Select a [Manual connection].
6 * Remote controller shown is a representative model.
【RC type 2】
Press down [TIMER ON] on the remote controller for more than 5 seconds.
7
【RC type 2】
[L1] will be displayed on the remote controller display.
8
Press [START/STOP].
9
Select [01] using 
.
10
Press [START/STOP].
11
W-LAN indicator lamp on the indoor unit will blink.
12
Select [Next] on the mobile app screen.
Page scroll
Open [Setting] -> W-LAN by following the instructions on the mobile app.
Select the SSID of the air conditioner you are connecting to.
Enter the PIN code written on the W-LAN adapter then press [Join].
Depending on the type of W-LAN adapter, you may not need to enter a password.
"Open in FGLair?" pop-up will be displayed, tap [Open].
When pop-up is not displayed, return to app screen manually.
Tap [Continue].
Select the SSID of the W-LAN adapter you are connecting to.
For iOS, it is necessary to select the SSID of the adapter on the terminal's W-LAN setting screen.
Enter the PIN code written on the W-LAN adapter then press [Connect].
Depending on the type of W-LAN adapter, you may not need to enter a PIN code.
13
Select the SSID of the W-LAN adapter you are connecting to.
For iOS, it is necessary to select the SSID of the adapter on the terminal's W-LAN setting screen.
14
Enter the PIN code written on the W-LAN adapter then press [Connect].
Depending on the type of W-LAN adapter, you may not need to enter a PIN code.
15
Select [Next] on the mobile app screen.
Page scroll
16
Select the W-LAN Access Point you are connecting to.
17
Enter the W-LAN Access Point password then press [Connect].
18
on the indoor unit will turn on.The setting is completed.
- *
- The time to complete the setting is different depending on the communication environment.
- *
- It takes max 15 minutes to complete the setting.
- *
- "FGLair" is a trademark of FUJITSU GENERAL LIMITED.
- *
- The company names and brand names referred to in this page are themselves the trademarks, registered trademarks, and products of the respective companies.
- *
- Screens, figures and movies are only for explanation.
This area is loaded with valuable information such as rebates, case studies,
videos, news, press releases, an efficiency calculator and an easy way to locate your local Fujitsu General contractor.
