FGLair™ app SET UP - STEP4: Pairing External type - Easy connection
1
Tap [＋] to add a new air conditioner.
2
Select the adapter type of your air conditioner.
3
Read the note and tap [Next].
Page scroll
4
Select a [Easy connection].
5
Press the WPS button on the wireless router that you are connecting to.
Page scroll
6
Confirm that LED 2 is flashing.(On/off at 2-second intervals.)
7
Then press and hold the Setting button on the W-LAN adapter for 3 seconds.
8
LED 2 lighting will change.(on/off: 2sec/2sec → 2sec/0.5sec)
9
Confirm that the LED 1 and 2 is both on to proceed.
10
Press [Register] to start the connection with the wireless router.
Ckeck that the your mobile device is linked to the wireless router you are connecting the air conditioner.
11
LED 1 and 2 will both flash 2 times.
The setting is completed.
- *
- The time to complete the setting is different depending on the communication environment.
- *
- It takes max 10 minutes to complete the setting.
- *
- "FGLair" is a trademark of FUJITSU GENERAL LIMITED.
- *
- The company names and brand names referred to in this page are themselves the trademarks, registered trademarks, and products of the respective companies.
- *
- Screens, figures and movies are only for explanation.
Welcome to the Fujitsu General Resource Center.
This area is loaded with valuable information such as rebates, case studies,
videos, news, press releases, an efficiency calculator and an easy way to locate your local Fujitsu General contractor.
This area is loaded with valuable information such as rebates, case studies,
videos, news, press releases, an efficiency calculator and an easy way to locate your local Fujitsu General contractor.
