AIRSTAGE Mobile app SET UP - STEP3: PAIRING USB: Manual connection

1

Tap [＋] to add a new air conditioner.

Tap [Registration Started].

Read the note and tap [Connected].

Select a [Manual connection].

Tap [Start Reading] and Read the QR code.

If QR code is not affixed, tap[If there is no QR code label]

Select [Next] on the mobile app screen. Select the WLAN Access Point you are connecting to.

Enter the WLAN Access Point password then press [Next].

WLAN indicator lamp on the indoor unit will turn on.

Press [Register started] on the screen on the mobile app to start the connection with the WLAN router.

Check that the your mobile device is linked to the WLAN router you are connecting the air conditioner.

WLAN indicator lamp on the indoor unit will turn on.

The setting is completed.

*: The time to complete the setting is different depending on the communication environment.
*: It takes max 10 minutes to complete the setting.

*: "AIRSTAGE Mobile" is a trademark of FUJITSU GENERAL LIMITED.
*: The company names and brand names referred to in this page are themselves the trademarks, registered trademarks, and products of the respective companies.
*: Screens, figures and movies are only for explanation.